Hitachi 50V500 Operating Manual page 54

Auto Channel Scan
Chan. Manager
Ant. A
Channel Source
Antenna
Auto Channel Scan
Channel List
Move
Chan. Manager
Ant. A
Auto Channel Scan
SEL
If the EXIT button is pressed while Auto Channel Scan function is engaged, programming will stop. If two antennas are connected,
switch antenna inputs and repeat Auto Channel Scan for the second antenna input.
Remember to select the correct Antenna/Cable mode before using Auto Channel Scan.
See Channel Manager - Scan to add or to erase additional channels.
Downloaded from www.Manualslib.com
This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip
unused channels when using CHANNEL UP ( ) or DOWN ( ).
Cable(1) Cable(2)
Start
Select
SEL
Scanning Channel Number: 66
Cancel
Cancel
manuals search engine
CHANNEL MANAGER
Chan. Manager
Ant. A
Channel Source
THUMB
Antenna
STICK
Auto Channel Scan
Channel List
Move Select
SEL
THUMB
STICK
SELECT
54
Cable(1) Cable(2)
Start