Hitachi 50V500 Operating Manual page 52

Aspect Mode
Auto Aspect
Automatically adjust the Aspect Ratio depending on the input signal to fill the screen.
Press THUMB STICK
Press down on THUMBSTICK to select. A " " in the box indicates that the feature is ON.
1. The Auto Aspect function is recommended on an input signal with VIDEO ID.
NOTES:
2. The Auto Aspect function is best used on component video, S-Video, and 480i component signals.
3. See page 31 for Aspect Mode availability.
Vertical Position
This function allows you to select when aspect style is either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. Vertical position can be
changed with these modes. For example, it will be useful for centering the picture area at both the top and bottom of the picture with
480i/480P signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).
Press THUMB STICK
Press THUMB STICK
Press EXIT to quit the MENU, or select Aspect to return to the main menu.
Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
NOTE:
Downloaded from www.Manualslib.com
Use this function to select the Picture Format Aspect Ratio.
, , to select menu item.
, , to select menu item.
or to adjust the function.
manuals search engine
52
ASPECT MODE