Omega BL600 Series User Manual page 19

BLADE AGITATOR ASSEMBLY
Use caution when handling the blade; it is sharp. Use a soft cloth to grab the blade
when inserting the blade assembly through the container.
1
2
The retainer nut is easily removed
using the disassembling tool (DT), sold
seperatly. Turn container upside down
and insert the disassembling tool on
the holes of the nut. Push the tool
counterclockwise to loosen nut (Step
1). Once loosened, remove by hand.
To release the blade use the other end of
the DT while grabbing the gear backup
pliers and turn counterclockwise (Step 2)
17