Ec Declaration Of Conformity - Husqvarna Rider 320 AWD Operator's Manual

Cutting unit
Cutting width, mm/inch
Cutting heights, 7 positions, mm/inch
Blade length, mm/inch
Blade
Part number
IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned
to the dealer or to an applicable station for recycling.
IMPORTANT INFORMATION We reserve the right to change specifications and designs without prior notice so as to implement
improvements.
Note that no legal claims are valid on the basis of information in this manual.
Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.
EC Declaration of Conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel.: +46-36-146500, hereby declares that Husqvarna Rider 318 and Rider 320
AWD from 2014's serial numbers and onwards (the year is clearly stated in plain text on the rating plate with subsequent serial
number), complies with the requirements of the COUNCIL'S DIRECTIVE:
of May 17, 2006 "relating to machinery" 2006/42/EC.
of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
The following harmonised standards have been applied: EN ISO 12100-2, ISO 5395
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, has issued reports regarding the
assessment of conformity according to annex VI of the COUNCIL'S DIRECTIVE of May 8, 2000 "relating to the noise emissions in
the environment" 2000/14/EC.
The certificates have the numbers: 01/901/094, 01/901/095, 01/901/096
Huskvarna 19 may 2014
Claes Losdal, Development Manager/Garden Products
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
TECHNICAL DATA
Combi 94
940/37
25-75/0.98-2.95
358/14.09
5796525-10
Combi 103
1030 / 41
25-75/0.98-2.95
388/15.28
5041882-10
Combi 112
1120 / 44.1
25-75/0.98-2.95
420 / 16,5
5041881-10
– 31
English