Damping; Device List - B & G B&G User Manual

Damping

Controls how quickly instruments respond to changes in values from sensors.
Damping can be used for heading, wind, boat speed and depth instruments.
Increasing the damping applies more averaging or smoothing of the data update rate
on the instrument or display. Damping settings are applied to SimNet displays and
Instruments belonging to particular damping SimNet Groups.
Note: Default damping is set to zero. Data received from H3000 is already damped!

Device List

Using the Device List Function you can:
•
•
•
•
Enter a logical
name for the
device such as
a location to
differentiate
same devices
e.g. ZG50
Starboard
Commission the System
list all of the active SimNet and NMEA2000 devices on the network, showing model
description and serial number. Devices can be sorted by model ID or by serial number
display information relating to a device such as, name, manufacturer, software
version, instance, status
give the device a logical name relevant to the user
see data coming from the device
Some devices can be confi gured
further
Device data can be viewed
| 45