B & G B&G User Manual page 14

5
7
8
Protect the dash area adjacent to the top edge (or bottom edge) of the display.
Apply upwards pressure on the bezel (A), this will create an opening between the
bezel and the case. Insert a medium size fl at blade screw driver into the gap (B) Slide
the screw driver along the gap to release the clips along the top. Continue down the
side until the bezel releases. The same routine can be applied to the bottom edge if
accessible.
Installing the Display
Drill a pilot hole for the fi ve screws
and an optional hole large enough
for the cables to emerge from.
Connect the cables.
Slide the display into the mounting
bracket and secure in place with the
bracket knobs.
B
A
6 Secure 5 the bracket to the surface
9 Attach the bezel. Firmly clip the
front bezel in place.
Zeus Bezel Removal
C
| 13