B & G B&G User Manual page 23

Can turn on by own PWR button
Can turn off by own PWR button
Can turn on other devices
Can be turned on or off by another device
Can turn off entire system if started by an
ignition switch
Can have more than one on a system
* If Power control wire is not connected.
If a display has its power state controlled by another display or ignition switch, it can't be
totally powered down. It can enter a standby state to save power. If the power button is
pressed and Power Off selected, a message will appear "Preparing to standby..."
To confi gure a display as a Power Control Slave or Master please refer to the Power
Control Setup.
22 | Wiring the Zeus Display
Power Control Table Slave
YES * YES
YES * YES
NO YES
YES YES
NO NO
YES YES
Master