Menu Adjustment Display - BYD S6 Owner's Manual

indicated in L/100 km.
Transient fuel consumption: when the
start button is at gear ON, the
transient fuel consumption is indicated
in litres per hour (L/h) in the case of
idle speed, and indicated in litre per
100 km (L/100 km) after the car speed
reaches a certain value. The
information is closely related to the
action of accelerating and braking.
Cruising range: used to indicate the
remaining travelling distance
calculated from the amount of
remaining fuel in the fuel tank. The
value is not entirely the same as the
actual one. When the fuel level is low
and the driving mileage is below a
certain value, the cruising range is
displayed as "- - km".
Average car speed: used to indicate
the average car speed from the last
reset to the present. It is indicated in
km/h.
Instruments and Indicator Lights 1-50
BYD AUTO S6, S6A, S6K Owner's Manual
Driving time: used to indicate the time
of idle speed and driving accumulated
from the last reset to the present.
Driving information operation: press
button on the steering wheel to
switch the displayed driving
information. Select any interface of
fuel consumption/average fuel
consumption/average car
speed/driving time and hold
Enter
button , and then the value in
the selected interface will reset to
zero.

Menu Adjustment Display

It is used to display the car status
information and set the car functions
and instrument display effects, etc.
By operating the buttons on the
steering wheel, the driving information
display on the right LCD is switched to
the menu adjustment interface.
Enter
Select
Enter
1. used to ascertain the
selected menu option.
2. used to scroll up the menu bar.
3. used to scroll down the menu
bar.
The menu structure is shown as
follows:
 Maintenance
 Maintenance interval
 Maintenance mileage
 Check
 Language