BYD S6 Owner's Manual page 136

three or more tread wear marks.
Maintenance
In addition to properly inflating,
correct wheel alignment could also
decrease the tyre wear. If you find a
tyre is worn unevenly, contact a BYD
service station to check the wheel
alignment.
The tyre has been balanced at the
factory. If you feel a constant vibration
while driving, please contact a BYD
service station to check the tyres. If
any tyre ever has been repaired or
replaced, make sure to re-balance the
tyre.
BYD AUTO S6, S6A, S6K Owner's Manual
Tyre Rotation
Non-directional
wheels and tyres
Front
Directional wheels and tyres
Front
To extend the tyre service life and
make it wear more evenly, change the
position of tyres every 10,000 km. You
should move the tyres to the positions
shown above when performing each
rotation.
The figure above shows how to
change the vehicle's tyre position.
WARNING
Do not mix radial, bias-belted or
●
bias-ply tyres.
Do not use tyre sizes other than
●
those recommended by
manufacturers.
Do not use tyres on BYD S6 if
●
you do not know how they were
used previously.
Chains
Snow chains are only used for
emergencies or in special areas.
Install the snow chains on the front
wheels. Please pay special attention
when driving your vehicle with snow
Self-maintenance 7-13