Technical Specifications - JBL radial micro User Manual

Symptom Possible Problem
Remote
Pod does not respond to remote The remote's battery power
commands. may be low.
Interference from surrounding
devices.
JBL Radial Micro is in "off"
mode.
Remote only operates at close The remote range is up to
range. 20 feet.
The remote battery power may
be low.
This device is susceptible to interference from other appliances plugged into nearby outlets. If you experience interference,
JBL recommends moving the device or the other appliance to a different outlet.
Solution Note
Replace battery.
Redock the iPod. If problem
persists, reset the iPod.
Move your JBL Radial Micro to Possible sources of interference
another location. include plasma displays,
dimmer-controlled lighting,
Ensure JBL Radial Micro is bright sunlight, and reflective
plugged into wall outlet and unit surfaces such as mirrors or
is turned on. blank walls.
Move the source unit closer to
the remote.
Replace battery.

Technical Specifications

Manufacturer:
Model Name:
Available in:
Requirements:
Drivers:
Power:
Frequency Response:
Dimensions:
Weight:
Input Impedance:
Signal-to-Noise Ratio:
Power Supply:
JBL 10-Button Remote
Transmission:
Frequency:
Operating Range:
Battery Type:
Dimensions:
Weight (including battery):

Harman Kardon Multimedia
JBL Radial Micro
White or Black
Main connection – iPod docking connector; Auxiliary connection – 1/8
(3.5mm) mini stereo jack
Four OdysseyTM transducers
2 x 10 Watts @ 10% THD
60Hz – 20KHz
Width: 8 (203mm)
Height: 8 (203mm)
Depth: 3.5 (89mm)
1.1 lb (0.5kg)
>5k Ohms
>85dB
Input: 100 – 240V AC, 50Hz/60Hz 0.5A
Output: 12V DC, 1.25A
IR
38kHz
20 feet
CR2032 3V
Width: 1.29 (33mm)
Height: 3.38 (86mm)
Depth: 0.23 (6mm)
1.2 oz