Subscribe to Our Youtube Channel
Related Manuals for TS-market EDIC-mini Plus
Summary of Contents for TS-market EDIC-mini Plus
- Page 1 EDIC-mini Plus Digital Voice Recorder Operation manual Version: 09-08-07 © TS-Market...
-
Page 2: Table Of Contents
Contents The Edic-mini Plus Digital Recorder ....3 Overlook ............. 3 Outlook of the Recorder ........4 Main Technical Characteristics and Functionality Technical Characteristics ........5 Functionality ..........6 Operating with the Recorder ......7 Stand-by Mode ..........7 Profile Select .......... -
Page 3: The Edic-Mini Plus Digital Recorder
EDIC-Mini Plus family. When buying, please check the box contents. Before using, read this instruction carefully. Overlook The recorders of the EDIC-Mini Plus family are professional devices that provide high quality recording on a built-in Flash memory. Recorded messages can be played back with headphones and saved as standard audio files on to a computer hard drive. -
Page 4: Outlook Of The Recorder
The recorder has a Voice Activation System that increases recording duration by compressing pauses. After the recorded files are uploaded on to a computer, the pauses can be restored. Outlook of the Recorder Microphone USB Connector Green and Headphones’ yellow LEDs connector Play button Reset button... -
Page 5: Main Technical Characteristics And Functionality
Main Technical Characteristics and Functionality Technical Characteristics Recording duration in the mode: 2 bit ADPCM, and sam- pling rate of 8 k Hz, 16 K bit/sec Model’s Recording Memory code duration capacity (hours) (Gb) 50h 00h 600h 00h 00 00h 00 Table 1. -
Page 6: Functionality
• Input voltage: .-. V; • Operating temperature: 0-50 °C; • Frequency band on computer: 00-6,000 Hz; in headphones: 00-,800 Hz; • Sampling rates: 6,000; 8,000; ,000 Hz; • Codec: 6 bit; • Sound/noise ratio: -7 Db; • Built-in microphone operating distance: 7-9 m;... -
Page 7: Operating With The Recorder
Operating with the Recorder Stand-by Mode When turned on, the recorder is in the stand-by mode and its LEDs are off. Notes To press the recorder’ button “twice” means to press the button two times within one second, to press three times- to press within 1.5 second. Profile Select The shipped Rec Manager program allows to set 8 custom recording profiles. -
Page 8: Recording Mode
you will select the next profile (the second one – if the first was selected). If the Rec button was pressed once or if there is no any button activity within seconds, the recorder will switch into the stand-by mode and the selected profile will be saved. -
Page 9: Playing Recordings Back
Playing Recordings Back Connect the shipped headphones to the special recorder’s connector. When the recorder is in the stand-by mode, press the Rec button twice and after short LED’sp15 flashes the recorder will play back the last recording. The green LED will flash with a second interval. -
Page 10: Deleting Recording
• To the beginning of the preceding recording – press the Play button twice. • To the beginning of the last recording – press the Rec button three times. • To the beginning of the first recording – press the Play button three times. Deleting Recording You can delete the recording while playing the recording back. -
Page 11: Connecting To A Computer And Charging The Rechargeable Battery
mode press the both button simultaneously until the yellow and blue LED turn on. The yellow LED shows the battery charge: the longer the flashes, the lower the charge. The blue LED shows the free memory capacity: the shorter the flashes, the bigger the free memory capacity. -
Page 12: Data Exchange
Attention! It is necessary to charge the rechargeable battery fully at least once every three months to keep it in working condition when you don’t use it for a long period of time. Otherwise the battery cannot be covered by the warranty. Attention! When the battery is fully discharged, the recorder does not answer to button activity, but if it is... -
Page 13: Updating The Recorder's Firmware
When you update the recorder’s firmware, it brings new possibilities to the recorder and fixes old bugs. You can download new firmware from: http://www.ts-market.com. Follow the next steps to renew the firmware: 1. Load the file with the new firmware;... -
Page 14: Access Levels
7. While the button is pressed, run the .exe file; 8. Follow all the steps that are in the program window until the renewing process is over. Attention! • For successful updating process, make sure that the recorder’s battery is fully charged. -
Page 16: Box Contents
Box Contents • Recorder; • USB cable; • Flash memory or CD with software and instructions; • Short user manual; • Warranty coupon.
Need help?
Do you have a question about the EDIC-mini Plus and is the answer not in the manual?
Questions and answers