Advertisement
FRONT PANEL DESCRIPTION
1. POWER INDICATOR
2. INSTRUMENT INPUT JACK CHANNEL ONE.
This is a standard ¼ inch mono jack socket.
3. INPUT GAIN SWITCH CHANNEL ONE.
High: Higher sensitivity, high impedance input (80mV/4.7MΩ).
Low: Lower sensitivity input setting (250mV) for guitars with onboard electronics.
Mute: mute the input stage, when switch on, the clip LED will light up with green.
4. CLIP/ MUTE INDICATOR
When the amplifier output is clipping, the LED will light up with red. When muted, the LED
will light up with green.
5. INPUT LEVEL SENSITIVITY CHANNEL ONE
6. BASS EQ CONTROL CHANNEL ONE
7. MID RANGE EQ CONTROL CHANNEL ONE
8. TREBLE EQ CONTROL CHANNEL ONE
9. EFFECTS ON/OFF SWITCH
8 Fixed digital audio effects for both channels.
10. FX SEND SOCKET
Connect the FX send to auxiliary FX unit input.
11. FX RETURN SOCKET
Connect the FX Return to auxiliary FX unit output.
12. INSTRUMENT INPUT JACK CHANNEL TWO
This is a combo socket accepts both standard ¼ inch mono jack and XLR plug.
13. INPUT GAIN SWITCH CHANNEL TWO
14. INPUT LEVEL SENSITIVITY CHANNEL TWO
15. BASS EQ CONTROL CHANNEL TWO
16. MID RANGE EQ CONTROL CHANNEL TWO
17. TREBLE EQ CONTROL CHANNEL TWO
5
Advertisement
