Network Configuration - Samsung SRD-1680D User Manual

main menu

NetwORK CONFIGuRAtION

It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with
events. You can configure the network environment which enables such functions.
Connection mode
You can set the network connection route and protocol.
Setting the Connection
Sets the protocol and environment of the network.
Using the mouse may help make setup easier.
1. Press the [meNu] button on the remote control or front
panel.
2. Use the left/right button (_ +) to select <Network>.
Network menu is selected.
3. Use the up/down buttons (▲▼) to move to <Connection
mode>, and press [eNteR] button.
4. Select <Interface>.
A window of connection mode setup appears.
5. Use direction buttons (▲▼_ +) to move to a desired item,
and set the value.
• IP Type : Sets the network connection mode.
• Transfer Bandwidth : Sets the maximum data flow to be
transferred. (Upload speed)
Options will vary depending on the selected connection
mode.
- For <Static>, <DHCp> : Select one from 50 kbps ~
2Mbps, and Unlimited.
- For <pppoe>, select one from 50 kbps ~ 600 kbps.
66_ main menu
Connection Mode
DDNS
Live Transfer
Mailing Service
SNMP
Connection Mode
Interface
Port
 IP Type Static
 Transfer Bandwidth 2Mbps
 IP Address 192.168.1.200
 Gateway 192.168.1.1
 Subnet Mask 255.255.255.0
 DNS Manual 168.126.63.1
OK Cancel
Logout Return
Network