GE RM24950 Instruction Manual

GE RM24950 Instruction Manual

Jasco products universal remote control instruction manual

Advertisement

Universal Remote
Instruction Manual
ON-OFF
SETUP
TV
CH
VOL
VOL
CH
SLEEP
PREV. CH
INPUT
1
2
3
4
5
6
7
8
9
0
ENTER
TV/VCR
INFO
GUIDE
OK
L
MENU
EXIT
PIP
SWAP
MOVE
24950

Advertisement

Table of Contents
loading

Summary of Contents for GE RM24950

  • Page 1 24950 Universal Remote Instruction Manual ON-OFF SETUP SLEEP PREV. CH INPUT ENTER TV/VCR INFO GUIDE MENU EXIT SWAP MOVE...
  • Page 2: Table Of Contents

    Troubleshooting ... 19 Introduction Congratulations on your purchase of this 24950 Universal Remote Control. It is one of the most unique looking, and easy to use remote controls available today. With the 24950 juggling multiple remote controls is a thing of the past! Your 24950...
  • Page 3: Button Functions

    Button Functions INFO Note: The Record button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the Record button once, then press it again for three seconds. Some buttons on the remote might have functions that are referred to by different names on the device you are controlling.
  • Page 4: Setup

    Setup Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA alkaline batteries. 3.
  • Page 5: Direct Code Entry

    Direct Code Entry 1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code from the code tables (on separate sheet).
  • Page 6: Programming Combo Device Codes

    Setup, cont. Programming Combo Device Codes Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/ VCR, etc.) will require you to set up two different Mode buttons to control both parts of the Combo device. For example, if you have a TV/DVD Combo, you might need to set up one code under the TV button to control the TV part AND a separate code (under any other Mode button) to control the DVD part.
  • Page 7: Setting Any Mode To Use Its Own Volume/Mute

    Setup, cont. Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function or the Volume/Mute buttons will do nothing. Setting ALL Volume/Mute Control to any one Mode This routine can set all Modes to “punch-through” to any one chosen Mode for Volume/Mute button control without the needing to change to that Mode.
  • Page 8: Code Learning

    Code Learning The learning feature lets you “learn” functions from your original remote control. For example - you may want to use your remote to operate the RANDOM PLAY feature from your original CD remote control. This remote is equipped with an “easy learning” feature that lets you “learn”...
  • Page 9: Ir Transmitter Finder Feature

    IR Transmitter Finder Feature This feature assists you in identifying where your original remotes IR transmitter is located and is particularly useful if your original remote’s IR transmitter is hidden behind a lens. 1. Point both remotes facing each other by approximately 1 inch apart (see Tips on Learning on previous pages).
  • Page 10: Clearing Commands

    Try to program the code again or try a different code. 90 Day Limited Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This...
  • Page 11 Universal Remote Instruction Manual Jasco Products Company 311 N.W. 122nd Oklahoma City, OK 73114 Made in China 24950 24950-06/07...

This manual is also suitable for:

24950

Table of Contents