GE RM24918 Instruction Manual

GE RM24918 Instruction Manual

Jasco products universal remote control instruction manual

Advertisement

Universal Remote
Instruction Manual
RM24918
RM84918

Advertisement

Table of Contents
loading

Summary of Contents for GE RM24918

  • Page 1 Universal Remote Instruction Manual RM24918 RM84918...
  • Page 2: Table Of Contents

    With the RM24918, juggling multiple remote controls is a thing of the past! Your RM24918 controls up to six devices, including the most popular brands of TV, VCR, DVD, SAT, CBL, and audio equipment.
  • Page 3: Setup

    Setup Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3.
  • Page 4: Button Functions

    Button Functions Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CH may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product.
  • Page 5 Button Functions, cont. Turns Backlight on and off. RESUME, AUDIO, ZOOM, ANGLE, TITLE Controls DVD functions. Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds.
  • Page 6: Dvd Functions

    DVD Functions This remote has several dedicated buttons used for DVD functions. The descriptions may vary from your original remote descriptions. SCAN+ and SCAN- buttons control the speed of Fast Forward and Reverse Playback respectively. SKIP (Channel Up & Down) buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc.
  • Page 7: Sat Functions

    SAT Functions GUIDE/PROG button displays on-screen Satellite Channel Guide. CHANNEL+ and CHANNEL- buttons perform the “Page+” and “Page-” function for on-screen Guide Menus used by some Satellite systems. INFO/DISPLAY button brings up Satellite Display screen for current Channel and system informa- tion.
  • Page 8: Code Entry

    Direct Code Entry 1. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code from the code tables (on separate sheet).
  • Page 9: Code Search

    Code Search If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  • Page 10: Using Your Remote

    Using Your Remote Code Identification The Code Identification Feature allows you to identify the 4 digit library code stored under your device key. For example, if you want to find out what 4 digit code is stored under your TV device key, follow the six steps below: 1. Press and hold the CODE SEARCH button until the red indicator stays on. Release the CODE SEARCH button.
  • Page 11: Controlling Devices With Power On And Off

    Using Your Remote, cont. Controlling Devices with Separate Power On and Off Buttons Some GE, RCA and ProScan models require you to press the device button for more than one second to turn the device on and the POWER button to turn the device off. Controlling Combo Devices Some Combo devices (e.g.
  • Page 12: Volume/Mute Control And Punch-Through

    Using Your Remote, cont. Volume/Mute Control and Punch- Through This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its own then those buttons will punch-through control to the TV Mode device without needing to change to TV Mode.
  • Page 13: Setting Any Mode For Its Own Volume/Mute

    Using Your Remote, cont. Setting any Mode to use its own Volume/Mute Control This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/Mute buttons will do nothing. 1.
  • Page 14: Troubleshooting

    Troubleshooting Remote does not operate your product. • Press the mode button of the product you want to control. • Program the remote with a new code. • Install new batteries. (You might have to reprogram your remote after installing new batteries.) •...
  • Page 15 90 Day Limited Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit.
  • Page 16 Jasco Products Company 311 N.W. 122nd Oklahoma City, OK 73114 Made in China Universal Remote Instruction Manual RM24918 RM84918 RM24918-...

This manual is also suitable for:

Rm8491824918 - backlit universal remote

Table of Contents