Now juggling multiple remote controls is a thing of the past! Your Universal Remote controls up to six devices, including the most popular brands of TV, VCR, DVD, CBL, and SAT. It is easy to use, easy to program, and it gives you total control—at the touch of your...
Button Functions Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CH may be called RECALL, or CLEAR may be called EXIT. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product.
Audio Button Descriptions Press the AUDIO device button to enable the AUDIO MODE. Audio functions are indicated by the blue button descriptions. LEVEL+/LEVEL- Sets the level of the speakers during test tone mode. ON•OFF Enables the receiver’s Digital Sound Processing mode. DSP MODE When the DSP mode is enabled, pressing this button lets you toggle through the various DSP modes.
Surround Sound Feature The surround sound feature may be turned ON/OFF by pressing the SURR ON•OFF 1. Press the SURR MODE button until the desired mode is found. 2. Press DELAY+ or DELAY- to achieve the desired delay affect. 3. Press the DSP ON•OFF button to turn DSP (Digital Sound Processor)
Code Search If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device ( controlled.
Using Your Remote, cont. Sleep Function The Sleep button enables the remote to turn off your TV after a period of 1 to 99 minutes as shown below. The remote must be in TV mode to set a Sleep Timer. This feature works even if your TV does not have a sleep feature.
Using Your Remote, cont. Volume/Mute Control and Punch- Through This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its own then those buttons will punch-through control to the TV Mode device without needing to change to TV...
Page 9
Using the FIND IT Locator Functions You can use the FIND IT remote to find the Keyfob, whether it has keys attached, or if it’s attached to something else. Or you can use the Keyfob to find your misplaced Remote. The Keyfob and the Remote are a “set”...
Page 10
FIND IT Locator Functions, cont. 3. Set the ITEM # for the Keyfob a. Remove the plastic tab from the battery compartment. The Keyfob beeps and immediately goes into setup mode. The LED blinks continuously to indicate that the Keyfob is ready to be set up.
FIND IT Locator Functions, cont. Using a FIND IT Keyfob to find a misplaced FIND IT Remote To find a misplaced FIND IT Remote, simply press the button on one of your FIND IT Keyfobs corresponding to the item # you set your FIND IT Remote to (1 thru 6).
Page 12
90 Day Limited Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit.
Page 13
Universal Remote Instruction Manual Jasco Products Company 311 N.W. 122nd Oklahoma City, OK 73114 Made in China RM24945 RM24945-09/05...