Sony DR-BT21G Operating Instructions Manual page 11

3
Perform pairing
procedure on the
Bluetooth device to
detect this unit.
The list of detected devices
appears on the display of the
Bluetooth device. This unit is
displayed as "DR-BT21G."
If "DR-BT21G" is not
displayed, repeat from step 1.
4
Select "DR-BT21G" on
the display of the
Bluetooth device.
5
If Passcode
required on the display
of a Bluetooth device,
input "0000."
Pairing is complete when the
indicator (blue) flashes slowly.
The message standing for
"Pairing complete" appears on
the display of some Bluetooth
devices.
* Passcode may be called "Passkey,"
"PIN code," "PIN number," or
"Password."
6
Start the Bluetooth
connection from the
Bluetooth device.
This unit memorizes the device
as the last connected device.
Some Bluetooth devices may
connect with the unit
automatically when pairing is
complete.
input is
*
When pairing with a
Bluetooth device that
cannot display a list of
detected devices or that
has no display
You may pair the device by setting
both this unit and the Bluetooth
device to pairing mode. For details,
refer to the operating instructions
supplied with the Bluetooth device.
Tips
• To pair with other Bluetooth devices,
repeat steps 1 to 5 for each device.
• To delete all pairing information, see
"Initializing the unit" (page 26).
11
US