Controlling The Audio Device - Avrcp - Sony DR-BT21G Operating Instructions Manual

To adjust the volume
Press the VOL + or – button while
listening to the music.
Tips
• Depending on the connected device, it
may be necessary to adjust the volume
on the connected device as well.
• Volume level for calling and listening
to music can be set independently.
To stop use
1
Terminate the Bluetooth
connection by operating
the Bluetooth device.
2
Press and hold the
POWER button for
about 3 seconds.
The indicator (blue) and
indicator (red) light up together,
and the unit turns off.
Tip
When you finish playing music, the
Bluetooth connection may terminate
automatically, depending on the
Bluetooth device.
Controlling the audio
device – AVRCP
If the Bluetooth audio device
connected with this unit supports
AVRCP (Audio Video Remote
Control Profile), you can control by
using the unit buttons.
Refer to the operating instructions
supplied with the Bluetooth device
on how to operate it.
Note
Operation of the Bluetooth connecting
device by this unit will vary depending on
its specification.
Status: In stop or pause mode
Short Press Long Press
Nx
1
FF / REW
3
1 Starts playback*
2 Stop
3 Skip to next/previous
4 Fast-forward/Fast-rewind*
Status: In play mode
Short Press Long Press
Nx
5
FF / REW
7
1
5 Pause*
6 Stop
7 Skip to next/previous
8 Fast-forward/Fast-rewind*
1
* You may need to press the button
twice depending on the Bluetooth
device.
2
* Some Bluetooth devices may not
operate.
Note
You cannot adjust the volume of the
Bluetooth device by the unit volume
buttons.
2
4
1
2
6
8
2
15
US