Toshiba W-603 Service Manual page 40

Disassembly and Reassembly
4-3-25 Cylinder Ass'y Removal
1) Remove the 3 Screws Œ, ˇ, ˆ.
2) Remove the Plate Cylinder A, B, C ´, ¨, Ø in the
direction of arrow.
3) Lift the Cylinder Ass'y ∏.
Note :
1) When reinstalling, push the Plate Cylinder A, B ¨,
Ø in the reverse of arrow and then, tighten the
2 Screws ˇ, ˆ.
2) Take care not to touch the Cylinder Ass'y and the
tape guide post at reinstalling Plate Cylinder C ´.
3) Take care not to touch the Cylinder Ass'y with
screw driver at reinstalling the Plate Cylinder C ´.
ΠSCREW
´ PLATE CYLINDER C
ˇ SCREW
¨ PLATE CYLINDER B
Fig. 4-32 Cylinder Ass'y Removal
4-18
4-3-26 Belt Pulley Removal
1) Remove the Belt Pulley Œ.
Note : Take extreme care not to touch the grease on
Belt Pulley Πat assembling or reassembling.
∏ CYLINDER ASS'Y
ˆ SCREW
Ø PLATE CYLINDER A
ΠBELT PULLEY
Fig. 4-33 Belt Pulley Removal
Toshiba