Table of Contents
Advertisement
Figure 6-11: Alarms Screen
6.13
SNMP
The SNMP Alarms Configuration Tab, shown in Figure 6-12, provides access to the SNMP Trap server
configuration. SNMP can be enabled by means of a radio button in the SNMP Alarms Configuration
pane. A SNMP Server IP address must be specified.
To send periodic alarm traps or a heartbeat, check the appropriate box and specify an update interval in
minutes. The Alarm and Heartbeat Object Identifiers (OIDs) are displayed to the right of the update
interval. Save changes or send a test trap by pressing the corresponding button.
The LM Management Information Base (MIB) can be viewed in the web browser by clicking on the blue text
that says "Click to view MIB"
41
Advertisement
Table of Contents
