Sony DVP-NS705V Service Manual page 12

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
PROGRESSIVE
L 1 1
INTERLACE
C E N T E R SELECTABLE
R 2 2
COAXIAL OPTICAL FRONT REAR W O O F E R R L Y P B P R SCAN SELECT
5.1CH OUTPUT AUDIO VIDEO S VIDEO OUT COMPONENT VIDEO OUT
PCM/DTS/DOLBY DIGITAL
DIGITAL OUT LINE OUT
B-2 Stereo audio cord
Coaxial digital
cord (not supplied) (not supplied)
or or
COAXIAL OPTICAL
PCM/DTS/DOLBY DIGITAL
DIGITAL OUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
(white)
Remove jack cap
before connecting
to coaxial or optical
digital input
[Speakers]
Stereo amplifier (receiver)
Front (L)
Front (R)
l: Signal flow
z Hints
B-1
• In connection , you can use the supplied
audio/video cord instead of using a separate stereo
audio cord.
• To realize better surround sound effects, make
sure that your listening position is in between
your speakers.
Connecting to an AV amplifier (receiver) with 5.1 ch input jacks and/or a
D
digital input jack and 4 to 6 speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
If you want to use the Dolby Digital, MPEG audio, or DTS decoder function on your AV
amplifier (receiver), connect to its digital jack using
can enjoy a more realistic audio presence in the comfort of your own home.
CD/DVD player
L 1
1
C E N T E R
R 2 2
COAXIAL OPTICAL
FRONT REAR W O O F E R R L Y P B P R
5.1CH OUTPUT AUDIO VIDEO S VIDEO OUT COMPONENT VIDEO OUT
PCM/DTS/DOLBY DIGITAL
DIGITAL OUT LINE OUT
to DIGITAL OUT
D-2
(COAXIAL or OPTICAL)
Optical digital cord
COAXIAL OPTICAL
(not supplied)
PCM/DTS/DOLBY DIGITAL
Remove jack cap
before connecting
DIGITAL OUT
Stereo audio cord
(not supplied)
or or
Coaxial digital cord
(not supplied)
to coaxial or optical
digital input
[Speakers]
AV amplifier (receiver) having
5.1ch inputs or/and a decoder
Center Subwoofer
l: Signal flow
B-1 . If the amplifier
B-2 .
B-1
(white)
1
(red)
2
R L
AUDIO VIDEO
LINE OUT
to LINE OUT L/R (AUDIO) 1 or 2
(red)
to audio input
MD deck/DAT deck
Note
Super Audio CD audio signals are not output from
the digital jack.
25
,continued
D-1 .
. With the following connections, you
D-2
PROGRESSIVE
INTERLACE
SELECTABLE
SCAN SELECT
D-1
to 5.1CH
OUTPUT L
C E N T E R
R
FRONT REAR W O O F E R
5.1CH OUTPUT
Monaural audio cord
(not supplied)
to audio input
[Speakers]
Front (L) Front (R)
Rear (L) Rear (R)
,continued 27
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
C
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
CD/DVD player
L
C E N T E R
R
COAXIAL OPTICAL FRONT REAR W O O F E R
5.1CH OUTPUT
PCM/DTS/DOLBY DIGITAL
DIGITAL OUT
C-2
Coaxial digital cord
(not supplied)
COAXIAL OPTICAL
PCM/DTS/DOLBY DIGITAL
DIGITAL OUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital
input
[Speakers]
Rear (L) Rear (R)
Subwoofer
l: Signal flow
z Hint
For correct speaker location, refer to the operating
instructions of the amplifier (receiver).
Notes
• When connecting 6 speakers, replace the
monaural rear speaker with a center speaker, 2
rear speakers and a subwoofer.
• Super Audio CD audio signals are not output from
the digital jack.
26
: Connecting to the 5.1ch input jacks
D-1
You can enjoy 5.1ch surround sound using
the internal Dolby Digital, MPEG audio,
DTS, or Super Audio CD Multi decoder of
this player. (When 6 speakers are connected,
set "SURROUND" to "OFF.")
You can also enjoy Dolby Surround (Pro
Logic) sounds, or surround sounds using
various "SURROUND" modes (page 57).
: Connecting to a digital jack
D-2
This connection will allow you to use the
Dolby Digital, MPEG audio, or DTS decoder
function of your AV amplifier (receiver). You
are not able to enjoy the surround sound
effects of this player.
z Hint
• For connection D-2
For correct speaker placement, refer to the
instructions of the connected components.
• To enhance the sound performance:
– Use high-performance speakers.
– Use front, rear, and center speakers of the same
size and performance.
– Place the subwoofer between the left and right
front speakers.
Notes
• When you connect an amplifier (receiver) that
conforms to the 96kHz sampling frequency, set
"48kHz/96kHz PCM" in "AUDIO SETUP" to
"96kHz/24bit" (page 80).
• Super Audio CD audio signals are not output from
the digital jack.
For connection D-2
• After you have completed the connection, be sure
to set "DOLBY DIGITAL" to "DOLBY
DIGITAL" and "DTS" to "DTS" in Quick Setup
(page 29).
For DVP-NS915V:
If your AV amplifier (receiver) has an MPEG
audio decoder function, set "MPEG" in "AUDIO
SETUP" to "MPEG."
28
1-6
C-1 . If your amplifier
.
C-2
PROGRESSIVE
1 1
INTERLACE
SELECTABLE
2 2
R L Y P B P R SCAN SELECT
AUDIO VIDEO S VIDEO OUT COMPONENT VIDEO OUT
LINE OUT
Stereo
audio cord (not
supplied)
(white)
1
or
or
(red)
2
R
AUDIO
LINE OUT
to LINE OUT L/R (AUDIO) 1 or 2
(white) (red)
to audio input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Front (L)
Center Rear (mono)
C-1
L
VIDEO
Front (R)