Subscribe to Our Youtube Channel
Related Manuals for Lampo HYPERCOLOR 575
Summary of Contents for Lampo HYPERCOLOR 575
- Page 1 HYPERCOLOR 575 CYM continuous colour changer wash luminaire USER’ S MANUAL release 1.0 This manual must be considered an integral part of the projector.
-
Page 2: Table Of Contents
BEFORE CONNECTING AND USING THE PROJECTOR, IT IS IMPORTANT TO READ CAREFULLY ALL THE INSTRUCTIONS IN THIS MANUAL. QUALIFIED PERSONNEL ONLY, IN COMPLIANCE WITH ALL THE SECURITY LAWS, CAN DO THE INSTALLATION, THE MAINTENANCE AND THE UTILISATION OF THIS PROJECTOR. BEFORE CONNECTING THE PROJECTOR, MAKE SURE THAT THE FREQUENCY AND THE VOLTAGE VALUES ARE SUITABLE AS SPECIFIED ON THE PROJECTOR. -
Page 3: General Description
GENERAL DESCRIPTION As shown in Figure 1, the HYPERCOLOR 575 is made up of the following parts: 1. Auxiliary support/ Rear panel 2. Cooling fan 3. Optional Anchoring bracket 4. Anchoring bracket 5. Projector body 6. Front panel 7. Top cover knob... -
Page 4: Rear Panel
Adjustment of Projector Body Angle As shown in the two pictures HYPERCOLOR 575 can be adjusted to any possible angle. Utilizing the Optional anchoring point the projector can easily adapt itself to any mounting situation like theatre and television ceiling applications or standard stage utilizations. -
Page 5: Start-Up Procedures
No more than three identical boxes can be stacked one on top of the other. Keep the original packing for possible shipments in the future. Storage The projector, in its original packing, must be kept in covered, dry areas with a temperature between -10° C and +50°... -
Page 6: Connections
Hypercolor 575 absorbs 940W at 230V. Makes sure the projector does not pull the cable in all different working positions, and that sources of heat are not placed in the vicinity. -
Page 7: Dmx Channel Assignment
DMX CHANNEL ASSIGNMENT CHANNEL FUNCTION CYAN YELLOW MAGENTA DIMMER SHUTTER SPECIAL FUNCTIONS DMX values (The values % are approximated) CHANNEL 1 = CYAN percent values decimal values 0 % >>> OPEN >>> 100% CYAN =255 OPTION: PERSONALITY DIP-SWITCH N°01 in position ON 0 % >>>... - Page 8 CHANNEL 5 = SHUTTER Percent values decimal values 0 > 10% OPEN 11 >20 % CLOSED 21%>>>> STROBE EFFECT MIN SPEED >>> 100% STROBE EFFECT MAX SPEED =255 OPTION : PERSONALITY DIP-SWITCH N°03 in position ON 0 > 10% CLOSED 11 >...
-
Page 9: Stand Alone Function
STAND-ALONE FUNCTIONS HYPERCOLOR can work in Stand-alone both single and in banks, that means without the need of a control unit, in Master/Slave function, since any luminaries can be Master of a bank, it becomes able to control synchronously all the other HYPERCOLOR fixtures and to manage a menu for a total of 6 options. -
Page 10: Maintenaince
MAINTENANCE CAUTION Safety guards, lenses, and filters must be replaced if they are visibly damaged to the point that they become ineffective (for example, if they have deep slashes or cuts). The lamp must be replaced if damaged, cracked, or deformed by the heat. PLANNED MAINTENANCE at user’s charge and responsibility Operation... - Page 11 FREQUENCY It is recommended to clean the projector every two months to ensure efficiency and performances. If the projector is used in particularly smoky or dusty areas, clean the projector more frequently. 1. Use a (soft) compressor to remove the dust from the front areas and from the fan (keeping the fan blocked with i.e.
-
Page 12: Troubleshooting
*Before switching on the projector, identify and remove the causes that made the fuse intervene WARRANTY HYPERCOLOR 575 is guaranteed against any manufacturing defects or material flaws, if defects or breakdowns occur during the warranty period. After inspection and according to its own unquestionable judgment, the Manufacturer will repair or replace the defective part. -
Page 13: Optional And Beam Angle
4- Once in the correct position, tight firmly. SPOT ADAPTER The spot adapter it is mountable on HYPERCOLOR 575. This system enable the projector to perform a beam like a standard theatrical PC Spot: Loosing a bit the knob on top of the adapter and moving the lens from front to back enable to project a variable aperture beam from 10°...
Need help?
Do you have a question about the HYPERCOLOR 575 and is the answer not in the manual?
Questions and answers