Application Range; Requirement For Test; Electrical Specification - LG 32LH2000 Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.

1. Application range

This specification is applied to the LCD TV used LD91A
chassis.

2. Requirement for Test

Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage (100-240V@50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.

4. Electrical specification

- Module General Specification
No Item
1 Screen Device
2 Aspect Ratio
3 LCD Module
4 Storage Environment
5 Input Voltage
6 Power Consumption
7 Module Size
8 Pixel Pitch
9 Back Light
10 Display Colors
11 Coating
Copyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
Specification
32" wide color display module
16:9
32" TFT LCD HD
Temp. : -20 ~ 60 deg
Humidity : 10 ~ 90 %
AC100-240V~, 50/60Hz
Typ : 87.8
760.0 (H) x 450.0 (V) x 48.0 (D)
0.17025(H) x 0.51175(V)
12 EEFL
1.06Billion(FHD LGD),16.7M (others)
3H, AG
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC/EN60065
- EMC:CE, IEC
LCD
LGD
LCD(Module) + Backlight(Lamp)
- 6 -
Remark
LGE Internal Use Only