Sony Cyber-shot DSC-TX7 Instruction Manual page 172

t (Print) t desired mode
4
This Image
Multiple Images
All in Date Range
All in This Folder
5 Desired setting item t [Start]
Quantity
Layout
Size
Date
Notes
• Movies cannot be printed.
• If the camera could not be connected to the printer, be sure to set [USB Connect] under [Main Settings]
to [PictBridge].
• Do not disconnect the USB cable while the
Prints the currently displayed image in single-image mode.
You can select and print multiple images.
After step 4, perform the following.
1Touch the image to be printed.
Repeat the above steps until there are no more images to
be printed.
Touch an image with a
mark.
2Touch [OK] t [OK].
Prints all images in the selected date range and folder at
once.
Touch [OK] after step 4.
Selects the number of copies of the specified image to be
printed.
• The designated number of images may not all fit onto a single
sheet depending on the quantity of images.
Selects the number of images you want to print side by side
on a sheet.
Selects the size of the printing sheet.
Selects [Date] or [Day&Time] to insert the date and time
on images.
• When you choose [Date], the date will be inserted in the order
you select using [Date & Time Setting] on the camera. This
function may not be available depending on the printer.
(PictBridge Connecting) indicator appears on the screen.
mark again to release the
GB
141