Sony Cyber-shot DSC-TX7 Instruction Manual page 116

Protect
Protects recorded images against accidental erasure.
The mark is displayed for registered images.
1 Press the
(Playback) button to switch to
playback mode.
t (Protect) t desired mode
2
(This Image)
(Multiple
Images)
(Set All in Date
Range)
(Set All in This
Folder)
(Set All AVCHD
files)
(Remove All in
Date Range)
(Remove All in
This Folder)
(Remove All
AVCHD files)
Note
• When using internal memory, a Folder View is used with still images and movies displayed in the same
folder.
Protects the currently displayed image in single-image mode.
You can select and protect multiple images.
After step 2, perform the following.
1Select an image to be protected, then touch it.
Repeat the above steps until there are no more images to be
protected. Touch an image with a
mark.
2Touch [OK] t [OK].
Protects all images in the date range or folder, or all AVCHD
movies.
Touch [OK] after step 2.
Unlocks all images in the date range or folder, or all AVCHD
movies.
Touch [OK] after step 2.
mark again to release the
85 GB