Changing The Angles; Displaying The Subtitle - Sony SLV-D910AZ Service Manual

Changing the angles

If various angles (multi-angles) for a scene
are recorded on the DVD, " " appears in
the display when you press ANGLE during
playback. This means that you can change
the viewing angle.
1
Press ANGLE during playback.
ANGLE/
SQPB
The angle number appears on the display.
The number after the slash indicates the total
number of angles.
2
Press B/b repeatedly to select the angle number.
The scene changes to the selected angle.
ENTER
Note
• Depending on the DVD, you may not be able to change the angles even if multi-angles are
recorded on the DVD.
76
Changing the angles
Various play mode functions
play, Shuffle play, Repeat play)
You can set the following play modes:
• Programme play (page 78)
• Shuffle play (page 80)
• Repeat play (page 81)
Note
• The play mode is cancelled when:
– you open the disc tray
– the player enters standby mode by pressing [/1.
Creating your own programme (Programme play)
You can play the contents of a disc in the
order you want by arranging the order of the
tracks on the disc to create your own
programme. You can programme up to 20
tracks.
1
Press PROGRAM when the DVD player is in
REPEAT/
stop mode.
PROGRAM
78
Various play mode functions (Programme play, Shuffle play, Repeat play)
ANGLE
B/b
(Programme
CLEAR
PROGRAM
H
V/v/B/b
ENTER
PROGRAMMATION B b ALEATOIRE
ENTER
RETURN
1-18

Displaying the subtitle

If subtitles are recorded on the disc, you can
change the subtitles or turn them on and off
whenever you want while playing a DVD.
1
Press SUBTITLE during playback.
SUBTITLE/
TIMER
2
Press B/b repeatedly to select the language.
Depending on the DVD, the choice of language varies.
ENTER
Refer to "DVD Audio/Subtitle Language" on page 126 for the abbreviation
of the language.
3
Press V/v repeatedly to select "Oui".
ENTER
To turn off the subtitles
Select "Non" in step 3.
Note
• Depending on the DVD, you may not be able to change the subtitles even if multilingual
subtitles are recorded on the DVD. You also may not be able to turn them off.
2
Press B/b to select "PROGRAMMATION",
then press ENTER.
ENTER
3
Press V/v/B/b to select the track number you
want to programme, then press ENTER.
ENTER
4
To programme other tracks, repeat step 3.
The programmed track numbers are displayed in the selected order.
5 Press H to start programme play.
Programme play starts.
When the programme ends, you can restart the same programme again by
pressing H.
To stop programme play
Press CLEAR during programme play.
To change or cancel a programme
1
Follow steps 1 and 2 of "Creating your own programme (Programme play)".
2
Press CLEAR.
The last programmed number is cancelled.
3
Follow step 3 for new programming.
Various play mode functions (Programme play, Shuffle play, Repeat play)
SUBTITLE
V/v/B/b
FRA Oui
77
Displaying the subtitle
PROGRAMMATION 01
Plage Ordre Programme
01 02 03 04 – – – – – –
05 06 07 08 – – – – – – – –
09 10 11 12
– – – – – – – –
13 14 15 16 – – – – – – – –
V v B b
– – – – – – – –
RETURN CLEAR ENTER
PROGRAMMATION 02
Plage Ordre Programme
01 02 03 04
0 1 – – – –
05 06 07 08 – – – – – – – –
09 10 11 12 – – – – – – – –
13 14 15 16 – – – – – – – –
V v B b
– – – – – – – –
ENTER
RETURN CLEAR
continued
79