Hitachi 50VG825 Operating Manual page 82

Setup
7. Use the CURSOR PAD
device you wish to learn. (Example: DVD 3)
8. Select NEXT to continue.
AV Net Setup Wizard : Custom Settings
Custom settings
Please choose the device you wish to learn.
Custom Device DVD3
Move SEL Select
9. Select the DVD 3 softkey to learn.
(Example: PLAY
10. Select NEXT to continue.
AV Net Setup Wizard : Custom Settings
Select the DVD3 softkey to learn?
TV Softkeys
POWER
MENU
SELECT
EXIT
Move SEL Select
11. Press and hold the
remote control while pointing directly at the
learning AV NET sensor of the LCD TV (located
at the lower right corner of the screen) at a
distance of 3 to 6 feet or 1 to 2 meters.
AV Net Setup Wizard : Custom Settings
Press and hold desired button to transfer the
command to AV NET.
Please wait while AV NET
Learns the command....
Move Select
SEL
12. If the IR Code transfer was successful, the
screen below appears, then select "OK" to
continue setup.
AV Net Setup Wizard : Custom Settings
Transfer was successful.
Press OK to store and continue.
Select
Move SEL
82
or to choose the
Back Next
button).
Back Done
"Play button" of the DVD
Cancel OK
http://www.pureglare.com.au
13. Select another softkey to learn or select
"DONE" to move on to the next screen.
AV Net Setup Wizard : Custom Settings
Select the DVD3 softkey to learn?
TV Softkeys
POWER
MENU
SELECT
EXIT
Move SEL Select
14. Select the Test button
check the response of the device to this
command.
15. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD3 Settings
Brand Name Custom
IR Code Set Custom
Transmission Test
Test Button
POWER
Move IR Out
SEL
16. Use the CURSOR PAD
Input that connects to the video and audio
output of the DVD.
17. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD3 Settings
Brand Name Custom
IR Code Set Custom
Inputs settings
Video Input Not Connected
Audio Input Not Connected
Move Change Source
18. Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD3 Settings
Brand Name Custom
IR Code Set Custom
Video Input Not Connected
Audio Input Not Connected
All settings are complete!
Select
Move SEL
Back Done
"Play button" to
, , and to
CH
Back Next
or to select the TV
, , and to
Back Next
SEL Select
Back Next