Hitachi 50VG825 Operating Manual page 77

Setup
AV NET SETUP WIZARD ( Example: A/V
RECEIVER Setup)
1. Press the SELECT button to start the SETUP
WIZARD.
AV Net Setup Wizard
Welcome to the AV Net Setup Wizard.
Before starting this wizard, please make sure
that all devices are connected appropiately
and the IR blasters are placed in front of the
devices IR sensor.
Move SEL Return
2. Use the CURSOR PAD
YES or NO.
3. Press the SELECT button to select "YES".
(Select YES to setup an A/V Receiver or NO to
setup other devices).
4. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Do you want to use an A/V Receiver.
Yes
No
Move SEL Select
5. Use the CURSOR PAD
brand name of your A/V Receiver.
6. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Please choose the Brand Name of your
A/V Receiver. If you can not find the
Brand Name, please choose "Other" and
proceed to the Learning mode by pushing
the Learning Mode Button.
Brand Name Hitachi
Learning Mode
Move Change Brand Name
7. Use the CURSOR PAD
preset IR Code.
8. Use the CURSOR PAD
POWER " Test button.
These On-screen buttons are called " Soft
Keys ".
9. Press the SELECT button to pass the Power
command through the IR Mouse and onto the
A/V Receiver ( Repeat steps 7 to 9 until finding
the IR code that will power up the A/V
Receiver. If the A/V Receiver turns ON, then
you have found the correct preset IR code ).
10. Use the CURSOR PAD
Back Start
11. Use the CURSOR PAD
or to highlight
12. Use the CURSOR PAD
, , and to
Back Next
13. Use the CURSOR PAD
or to choose the
, , and to
14. Use the CURSOR PAD
(1/54)
Back Next
or to choose the
to highlight the "
http://www.pureglare.com.au
, ,
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Please choose the IR Code Set number.
If the matched Code does not exist,
please choose "Other" and proceed to
the Learning mode.
Brand Name Hitachi (44/54)
IR Code Set 1 (1/12)
Learning Mode
Test Button
POWER SOURCE 1
Move Change IR Code
or
Input that connects to the video and audio
output of the A/V Receiver.
, ,
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Hitachi (44/54)
Brand Name 3 (3/12)
TV Input Settings
If you connect the video or audio
output of the A/V Receiver to this TV,
please select a TV Input.
TV Input Not Connected
Move Change Input SEL Select
or
A/V Receiver Source if you have connected the
Monitor Out and Optical Out to the A/V
receiver. Select " Not Connected " if not used.
, ,
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Hitachi (44/54)
IR Code Set 3 (3/12)
TV Input Hitachi
Monitor Out Settings
If you connect the Monitor out or Optical out
to an A/V Receiver, please select
an A/V Receiver Source.
Monitor Out Not Connected
Optical Out Not Connected
Move Change Source SEL Select
and to
VOL
Back Next
to select the TV
and to
Back Next
to select the
and to
Back Next
77