Subscribe to Our Youtube Channel
Related Manuals for Altocraft 241-9899
Summary of Contents for Altocraft 241-9899
- Page 1 241-9899 18V CORDLESS DRILL Operator’s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.
- Page 2 IMPORTANT SAFETY INSTRUCTIONS WARNING When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. READ INSTRUCTIONS BEFORE USING THIS TOOL 1. KEEP THE WORK AREA CLEAN. Clean areas prevent injuries. 2.
- Page 3 PRECAUTIONS FOR BATTERY and CHARGER CHARGE BATTERY AT LEAST 6 HOURS before initial use. 1. CHARGE AT ROOM TEMPERATURE. The roomtemperature must be higher than 32°F and lower than 122°F. 2. DO NOT CHARGE IF THE CHARGER’S CORD OR PLUG IS DAMAGED. Charging with a damaged cord may result in a fire or electrical shock.
- Page 4 OPERATING PROCEDURES • Release the trigger when a clicking sound indicates the chuck will not turn further. • For drilling, always use the drill setting, indicated by the pictogram of a drill bit. At this setting, the drive will not disengage from the chuck. KEYLESS CHUCK •...
- Page 5 MAINTENANCE Keep the tools clean using a soft, damp (not wet) cloth. Do not use solvents on the plastic parts. Lubrication is not necessary. After long use, have an authorized service center maintain and lubricate the tool. Should the drill chuck require replacement: 1.
- Page 6 SCHEMATIC DRAWING WARNING Repairs should be made by an authorized repair centre.Do not open or disassemble this power tool. Contact SHARP-GROUP ENTERPRISE CO., LTD. at 1-866-915-8626 for questions regarding this power tool.
Need help?
Do you have a question about the 241-9899 and is the answer not in the manual?
Questions and answers