Page 1
USER’S MANUAL version 1.1 English KCT-510 KEYCHAIN REMOTE CONTROL...
Page 2
KCT-510 KEYCHAIN REMOTE CONTROL Picture of an arbitrary COCO receiver (not included) A: Indicator C: Battery B: On/off buttons D: Code selector...
Page 3
KCT-510 KEYCHAIN REMOTE CONTROL [1] Carefully unsnap the front side from the back [2] Install a battery. Now snap the front side onto side. Use a flat screwdriver if necessary. the back side again. Be careful not to break the small catch on the...
Page 4
The selected combination must to the same letter and number combination are match the setting of your receiver. operated. You may have a COCO receiver that The indicator lights up when a button is automatically programs itself to the code (see the pressed!
Page 5
- Check the correct placement and/or function of the battery (replace if necessary). - Check step for step whether the concerned receiver is programmed correctly. - Make sure the set "house code" (see [3 - 4]) of this product is the same as on the COCO receiver(s) that are to be controlled.
Page 6
If possible, submit this product for recycling after use. Do not dispose of the product with household trash. Warranty and copyright This device is covered by a 2-year warranty that begins on the day of purchase. Visit www.coco- technology.com/warranty for additional information. Reprinting of (portions of) this manual without...
Page 7
P.O. BOX 126 4760 AC ZEVENBERGEN THE NETHERLANDS www.coco-technology.com Declaration of Conformity Pan-Trade International BV declares that the COCO product, model: type designation KCT-510 KEYCHAIN REMOTE CONTROL item number 74021 is in compliance with the essential requirements and other relevant provisions of directives R&TTE 1999/5/EC, EMC 2004/108/EC and LVD 2006/95/EC and is compatible with the standards EN 300 220- 1/3, EN 55015 and EN 301 489-1/3.
Need help?
Do you have a question about the KCT-510 and is the answer not in the manual?
Questions and answers