To Terminate A Call; To Receive A Call - Sony DR-BT10CX Operating Instructions Manual

To call
1
Use the buttons on your
mobile phone when
making a call.
If no sound is heard through
this unit, press the multi
function button.
Tip
You can call in the following way,
depending on the BLUETOOTH mobile
phone. Refer to the manual supplied with
your mobile phone on operating details.
– When not communicating, you can call
using the voice-dial function by
pressing the multi function button.
– You can call a specific number by
pressing the multi function button for
about 2 seconds.

To receive a call

When the telephone is ringing, ring
tone will be heard through the unit.
1
Press the multi function
button on the unit.
The ring tone differs in the
following ways, depending on
your mobile phone.
– ring tone set on the unit
– ring tone set on the mobile
phone
– ring tone set on the mobile
phone only for BLUETOOTH
connection
16
US
Note
If you pressed the call button on the
BLUETOOTH mobile phone, some
BLUETOOTH mobile phones may have
handset use priority. In this case, set to
talk with the unit by pressing and holding
the multi function button for about 2
seconds, or by operating the
BLUETOOTH mobile phone. For details,
refer to the manual supplied with your
BLUETOOTH mobile phone.
To adjust the volume
Press the VOL + or – button.
Tips
• You cannot adjust the volume when not
communicating.
• Volume level for calling and listening
to music can be set independently.

To terminate a call

You can end a call by pressing the
multi function button on the unit.
To stop use
1
Terminate BLUETOOTH
connection by the
BLUETOOTH mobile
phone.
2
Press and hold the
POWER button for
about 3 seconds to turn
off the power.
The indicator (blue) and
indicator (red) light up
together, and the unit turns
off.