How To Start Using The Remote Control; Power Cable Connection - Elisa Viihde Service Manual

Connect one end of the HDMI cable to the digibox HDTV port and the
other end to the HDMI port in your TV (for TVs with HD Ready and Full
HD labels). If you use the SCART port, connect one end of the SCART
cable to the digibox TV port (TV) and the other end to the SCART port in
your TV
SCART and HDMI cables

3.2.4 How to start using the remote control

Install the batteries supplied in the kit into the remote control. To open
the battery compartment lid, press on the lid with your thumb and push
the lid down. Install the batteries correctly, matching the symbols, then
push the lid back in to place to close.

3.2.5 Power cable connection

Connect the cable to the digibox power port and the other end to the
mains outlet.
Note! Use only the original power cable supplied with the kit!
Power port and power supply unit with cables
6