Remote Control; Installation Of The Equipment; Quick Guide To Installation - Elisa Viihde Service Manual

2.1 Remote control

The Elisa Viihde digibox is operated with the aid of the remote control
included in the kit. The functions assigned to the remote control
buttons may vary depending on the operation mode. When the remote
control signal is sent to the digibox, the power button LED will flash,
indicating that the digibox is receiving a signal from the remote control.
NOTE! The remote control has two power buttons. To turn on the Elisa
digibox use the left-hand power button.
Please note that during operation the remote control should always
be directed towards the front panel of the digibox. Any obstructions
between the remote control and the digibox will interfere with the
remote control's signal to the digibox.
3. Installation of the
equipment

3.1. Quick guide to installation

Connect the digibox to the antenna and cable network with the
1.
antenna cable.
2. Connect the Elisa Viihde digibox to a broadband modem: plug
one end of network cable to a Network port and the other end to a
free port in the Elisa Viihde broadband modem.
3. Connect the digibox and the TV together: connect one end of the
cable to the digibox HDMI port and the other end to the TV HDMI
port. If your TV has no HDMI port or no free HDMI port, use a SCART
cable. Connect one end of the SCART cable to the digibox TV port
and the other end to the TV SCART port.
4. Install batteries in the remote control.
Connect the power cable to the digibox: connect the power cord
5.
to the digibox port and the other end to the mains outlet.
6. Turn the TV on. Select your TV IN port (normally AV IN port). If the
digibox is connected to the TV with an HDMI cable, select the HDMI
IN port.
7. Turn the digibox on.
8. The Elisa Viihde digibox is now ready for use. Please refer to
section 4 of this manual for more information on how to start using
the services.
Digibox connection to various devices
4