Other Features; Set The Alarm Timer; Set The Sleep Timer - Philips MCM2300 User Manual

8 Other features

Set the alarm timer

This product can be used as an alarm clock. You
can select the disc, FM, or .mp3 files on a USB
storage device as alarm source.
Note
•
Make sure that you have set the clock correctly.
•
If the selected alarm source is unavailable, this product
switches to FM mode automatically.
1
In normal standby mode, press and hold
SLEEP/TIMER for two seconds.
» The hour digits blink.
2
Press / repeatedly to set the hour,
and then press SLEEP/TIMER to confirm.
» The minute digits blink.
3
Press / to set the minute, and then
press SLEEP/TIMER to confirm.
» The last selected alarm source blinks.
4
Press / to select an alarm source
(DISC, USB or Tuner), and then press
SLEEP/TIMER to confirm.
» VOL_XX (XX indicates the volume
level of alarm) blinks.
5
Press / to set the alarm volume,
and then press SLEEP/TIMER to confirm.
» is displayed.
Stop an alarm
When an alarm rings, press
to stop it.
14 EN
or SLEEP/TIMER
Note
•
If you do not stop an alarm, it keeps ringing for 30
minutes, and then the product automatically switches to
normal standby mode.
Activate/deactivate alarm timer
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate timer.
» If timer is activated,
Tip
•
Alarm timer is not available in AUDIO IN mode.

Set the sleep timer

MCM2300 switches to the standby mode
automatically after the set time.
When MCM2300 is turned on, press
SLEEP/TIMER repeatedly to select a time
period (in minutes).
» When the sleep timer is activated,
displayed.
To show the remaining time
Press SLEEP/TIMER.
•
To deactivate the sleep timer
Press SLEEP/TIMER repeatedly until [OFF]
•
is displayed.
is displayed.
is