Sony Cyber-shot DSC-HX100 User Manual page 180

Cyber-shot User Guide
Operation Search
Before Use
Shooting
Viewing
Using 3D Functions
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Using MENU items (Viewing) > MENU items (Viewing) > Protect
Protect
To cancel the protection
Protects recorded images against accidental erasure.
The mark is displayed for registered images.
1. Press the
(Playback) button to switch to playback mode.
2. MENU
(Protect)
Protects the currently displayed image in single-image mode.
(This Image)
You can select and protect multiple images.
Do as the following after step 2.
Select an image then press
(Multiple
Repeat the above steps until there are no more images to be protected.
Images)
Select an image with a
MENU
Protect all images in the selected burst group at once in Display Burst
(Set All
Group mode.
Burst Images.)
Press [OK]
Release all protected images in the selected burst group at once in Display
(Remove All
Burst Group mode.
Burst Images.)
Press [OK]
Note
When the internal memory is used to record images, [View Mode] is set to Folder view and
still images and movies are displayed in the same folder.
To cancel the protection
Select the image for which you want to cancel protection, and unlock it by pressing
control button as the same procedure to protect it. The
protection is released.
Copyright 2011 Sony Corporation
180
desired mode on the control button
.
mark to release the
[OK]
after step 2.
after step 2.
indicator disappears, and the
Print
mark.
on the
Back to top