Advertisement
Quick Links
Instruction Manual
230 Watt PS2 Replacement Computer PC Power Supply
PS2POWER230
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x 230 Watt AT Power Supply
• 1 x Instruction Manual
• 1 x Power Cord (NA)
Installation
Note: Check the power supply voltage before installation. It should
be the same as your local power voltage (115V for North America
and 230V for most of the European countries). Change the voltage
setting if necessary.
1. Disconnect the power cord from your old power supply.
2. Follow your computer case manual and open the case.
3. Disconnect all the power connectors from the mother board and
the peripheral devices such as hard drives, floppy disks, etc.
4. Remove the existing power supply from your computer case and
replace it with the StarTech.com power supply.
5. Connect the power connectors to your motherboard and
peripheral devices.
6. Close your computer case.
7. Connect the power cord to the StarTech.com power supply.
For the most up-to-date information, please visit: www.startech.com
Specifications
Dimensions
Weight
Input Voltage
Output Voltage
Connectors
*actual product may vary from photos
5.9 x 3.35 x 5.87 in. (150 x 85 x 149
mm)
2.82 lbs (1.28 kg)
115/230 V
230W
4 x 4-pin LP4 female, 2 x small internal
power, 2 x LED display power, 1 x PS/2
motherboard adapter
Manual Revision: 02/03/2012
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for StarTech.com PS2POWER230
Summary of Contents for StarTech.com PS2POWER230
-
Page 1: Packaging Contents
2. Follow your computer case manual and open the case. 5.9 x 3.35 x 5.87 in. (150 x 85 x 149 Dimensions 3. Disconnect all the power connectors from the mother board and the peripheral devices such as hard drives, floppy disks, etc. Weight 2.82 lbs (1.28 kg) 4. Remove the existing power supply from your computer case and Input Voltage 115/230 V replace it with the StarTech.com power supply. Output Voltage 230W 5. Connect the power connectors to your motherboard and peripheral devices. 4 x 4-pin LP4 female, 2 x small internal 6. Close your computer case. Connectors power, 2 x LED display power, 1 x PS/2 7. Connect the power cord to the StarTech.com power supply. motherboard adapter For the most up-to-date information, please visit: www.startech.com Manual Revision: 02/03/2012... -
Page 2: Technical Support
• Consult the dealer or an experienced radio/TV technician for help. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Need help?
Do you have a question about the PS2POWER230 and is the answer not in the manual?
Questions and answers