Toa EC-100M Instruction Manual

CHIME MICROPHONE
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.

1. GENERAL DESCRIPTION

TOA's EC-100M Chime Microphone features a soft, comfortable chime tone suited for paging announcements.
Its operation is as easy as those of normal microphones.

2. FEATURES

• Ascending 4-note pre-paging chime tone, and descending 4-note post-paging chime tone.
• The microphone can be turned on or off by simply one-touch pressing a button.
• Long battery life. Two R14P batteries keep the unit in operation for about 3 years (provided the unit is used for an hour
per day).

3. BEFORE USING THE UNIT

Prepare two R14P batteries to operate the unit.

4. NOMENCLATURE AND FUNCTIONS

[Top]
Windscreen
(accessory)
2
1. Microphone
Close-talk type unidirectional dynamic microphone.
The gooseneck shaft facilitates positioning of the
microphone for the optimum acoustic effect.
2. Microphone ON Key
Pressing this key sounds an ascending 4-note tone and
turns on the microphone.
3. Microphone OFF Key
Pressing this key sounds a descending 4-note tone and
turns off the microphone.
4. In-Use Lamp
Lights when the microphone is turned on. Unless this
lamp lights even when the Microphone ON Key is
pressed, replace the batteries.
[Rear]
1
[Bottom]
4
3
5. Output Jack
Chime tone and microphone signals are provided from
this 600 Ω, unbalanced output jack. Using the supplied
cord, connect this jack to an amplifier.
6. Battery Compartment
Place an R14P battery. (2 places)
7. Chime Volume Control [CHIME VOL.]
Turning the control clockwise using the supplied
screwdriver will increase the volume.
INSTRUCTION MANUAL
EC-100M
5
6
7