Related Manuals for Onix OFR-11-7T
Summary of Contents for Onix OFR-11-7T
- Page 1 11 Fin oil heater Model No: OFR-11-7T instruction manual INSTRUCTION MANUAL AFTER SALES SUPPORT: N13275 AUS 1300 886 649 | NZ 0800 836 761...
-
Page 2: Important Safety Instructions
Important Safety Instructions Store this instruction manual in a safe place, along with your warranty card, purchase receipt and packaging box for future reference. Please pay particular attention to the safety information. This appliance is not intended for use by 13. -
Page 3: Using Your Heater
Using your Heater Place the heater on a flat surface, away from flammable objects. Plug in the power cord to the wall socket when ready for use. To use the heater manually, set the 24 hour timer switch to ‘1’. Then press the power switch to turn the heater on. -
Page 4: Assembling The Heater
Assembling the Heater Caution: Ensure the power cord is not plugged in before attempting to assemble the heater. The only assembly required for the oil heaters are attaching the wheels onto the main unit. Follow these procedures: Turn the unit upside down so that the wheels can be attached on. The heater should only ever be in the upright position unless the wheels are being removed or put on. -
Page 5: Safety Instructions
Safety Instructions Use the appliance only for the mentioned purpose, namely as a radiator for domestic use. Do not use it as any other application as it could get dangerous. Do not operate the heater near flammable objects (furniture, curtains, shelves etc). Do not operate the heater near liquids (bath-tubs, showers, water basins, swimming pools etc). - Page 6 Features of your heater Variable heat thermostat Use the dial to adjust the 2 On/off heat power buttons temperature setting to your Turn either or both of the desired comfort level. Turn switches on to start the heater. clockwise to increase the heat. There is a maximum heating power output of 2400W when both switches are turned on.
-
Page 7: Care And Cleaning Instructions
Care and Cleaning Instructions The appliance is not designed to be dismantled without special tools. Please do not attempt to separate the unit. Ensure the appliance is disconnected from the power supply and switched off before attempting any cleaning. Cleaning the exterior of the unit should only be attempted with a slightly damp, soapy cloth. - Page 8 Distributed by Tempo (Aust) Pty Ltd ABN 70 106 100 252 PO Box 6056 Frenchs Forest LC Sydney, Australia NSW 2086 Telephone: (02) 9975 2199 Fax: (02) 9975 2688 Email: info@tempoaustralia.com.au Customer Helpline: 1300 88 66 49 (Aust) 0 800 836 761 (NZ)