Detaching The Front Panel - Kenwood DNN9250DAB Quick Start Manual

Detaching The Front Panel

You can detach the front panel to prevent theft.
Ñ DNN9250DAB/ DNR8025BT
1
Press the <0> button for 1 second to
open the front panel.
Then, detach the panel as the diagrams below.
1
⿠After detaching
1) Put the panel in the protective bag supplied
with the unit.
✎
NOTE
• The attaching plate closes automatically in about
10 seconds after the front panel is released.
Remove the panel before this happens. To prevent
deterioration, do not touch the terminals of the unit
and faceplate with your fingers.
• If the terminals on the unit or faceplate get dirty,
wipe them with a clean soft dry cloth.
• For attaching the panel, see Attaching the front
panel (P.25).
3
2
4
Ñ DNN6250DAB
1
Slide the Release key upward to detach
the part of the front panel.
Then, detach the panel as the diagrams
below.
1
⿠After detaching
1) Hold the panel securely so as not to drop
it accidentally, and fit it onto the attaching
plate until it is firmly locked.
2
1
✎
NOTE
• When detaching a part of the front panel, detach
it toward the front side as shown in the diagram
above. If it is detached upward, the front panel will
be broken.
• To prevent deterioration, do not touch the terminals
of the unit and front panel with your fingers.
• If the terminals on the unit or front panel get dirty,
wipe them with a clean soft dry cloth.
2
English ñ
15