Exp/P/Iso; Noise Reduct; Sleep - Olympus E-PL7 Instruction Manual

U Disp/8/PC
Option
z lock
q Close Up Mode [mode1]: Press U to zoom in (to a maximum of 14 ×) and
Peaking Settings
Backlit LCD

Sleep

6
8 (Beep sound)
USB Mode
V Exp/p/ISO
Option
EV Step

Noise Reduct.

Noise Filter
ISO
ISO Step
ISO-Auto Set
88 EN
If [On] is selected, the preview switches between lock and
release every time the button registered for preview is
pressed.
press G to zoom out.
[mode2]: Press U to display the zoom frame for the
specifi ed zoom ratio. Press U again to zoom in.
You can switch the edge enhancement color between white
and black.
If no operations are performed for the selected period, the
backlight will dim to save battery power. The backlight will
not dim if [Hold] is selected.
The camera will enter sleep (energy saving) mode if no
operations are performed for the selected period. The
camera can be reactivated by pressing the shutter button
halfway.
When set to [Off], you can turn off the beep sound that is
emitted when the focus locks by pressing the shutter button.
Choose a mode for connecting the camera to a computer or
printer. Choose [Auto] to display USB mode options every
time the camera is connected.
Choose the size of the increments used when selecting
shutter speed, aperture, exposure compensation, and other
exposure parameters.
This function reduces the noise that is generated during
long exposures.
[Auto]: Noise reduction is performed at slow shutter speeds,
or when the internal temperature of the camera has risen.
[On]: Noise reduction is performed with every shot.
[Off]: Noise reduction off.
• After shooting, processing time takes about the same
amount of time as shooting time.
• Noise reduction turns off automatically during sequential
shooting.
• This function may not work effectively with some shooting
conditions or subjects.
Choose the amount of noise reduction performed at high
ISO sensitivities.
Set ISO sensitivity.
Select the increments available for choosing ISO sensitivity.
Choose the upper limit and default value used for ISO
sensitivity when [Auto] is selected for ISO.
[High Limit]: Choose the upper limit for auto ISO sensitivity
selection.
[Default]: Choose the default value for auto ISO sensitivity
selection.
Description
Description
U
c
MENU
g
—
—
—
—
—
—
—
V
c
MENU
g
—
35
—
70
—
—