Sequential Shooting/Using The Self Timer - Olympus E-PL7 Instruction Manual

Sequential shooting/using the self timer

Keep the shutter button pressed all the way down to take a series of photos.
Alternatively, you can take pictures using the self timer.
Display the live control and select sequential shooting/self timer using FG.
1
Select an option using HI and press Q.
2
Single-frame
o
shooting
T
Sequential H
S
Sequential L
Self-timer
Y12s
12 SEC
Self-timer
Y2s
2 SEC
Custom Self-
YC
timer
$
Notes
• To cancel the activated self-timer, press G.
Cautions
• When you are using S, no confi rmation image is displayed during shooting. The
image is displayed again after shooting ends. When you are using T, the image shot
immediately before is displayed.
• The speed of sequential shooting varies depending on the lens you are using and the
focus of the zoom lens.
• During sequential shooting, if the battery check blinks due to low battery, the camera
stops shooting and starts saving the pictures you have taken on the card. The camera
may not save all of the pictures depending on how much battery power remains.
• Fix the camera securely on a tripod for self-timer shooting.
• If you stand in front of the camera to press the shutter button halfway when using the self-
timer, the photograph may be out of focus.
Single
o o
T T Y12s Y12s
P S S
Shoots 1 frame at a time when the shutter button is pressed
(normal shooting mode, single-frame shooting).
Photographs are taken at about 8 frames per second (fps) while the
shutter button is pressed all the way down. Focus, exposure, and
white balance are fi xed at the values for the fi rst shot in each series.
Photographs are taken at about 3.5 frames per second (fps)
while the shutter button is pressed all the way down. Focus and
exposure are fi xed according to the options selected for [AF
Mode] (P. 69) and [AEL/AFL] (P. 93).
Press the shutter button halfway to focus, the rest of the way
down to start the timer. First, the self-timer lamp lights up for
approximately 10 seconds, then it blinks for approximately 2
seconds and the picture is taken.
Press the shutter button halfway to focus, the rest of the
way down to start the timer. The self-timer lamp blinks for
approximately 2 seconds, and then the picture is taken.
Press the INFO button to set [Y Timer], [Frame], [Interval Time],
and [Every Frame AF].
Select a setting using HI, and adjust the setting by using the
control dial (P).
If [Every Frame AF] is set to [ON], each frame is automatically
focused before shooting.
S-IS AUTO S-IS AUTO
WB WB WB WB
AUTO AUTO AUTO AUTO
Sequential
4:3 shooting/
L N
self timer
FullHD
F
Y2s Y2s Yc Yc
5
EN 61