SATO CX400 Service Manual page 8

Section 1: Introduction
CONNECTION PORTS
Extension Connection Port
MONITORING SYSTEMS
Media Index Sensor
Ribbon Sensor
Dispenser Sensor
Print Head Open Sensor
Page 1-4
Accessible from the front of the printer and is located
behind the face cover. Permits the connnection of optional
extension modules.
Front View
Connection Ports, Figure 1-3
Determines the print location upon the label by detecting a
label gap or eye mark and then stepping the media to the
print position.
Allows the printer to continuously monitor the presence of
ribbon when operating in the thermal transfer mode.
Monitors the presence of a label in the dispenser. When
the label is removed from the dispenser, the next label will
be prompted
Detects when the print assembly is not latched into the
print position.
PN 9001110A
Extension Port
Rear View
SATO CX400 Service Manual
Serial Port
VAC Power Supply Port
Parallel Port