Adjusting Procedure - ViewSonic VLCDS23722-1W Service Manual

1. As shown on Fig 1. Power off the monitor and unplug the DC cable.
2. As shown on Fig. 2 and Fig. 3. Press [2] key then plug DC cable at the same time.
3. As shown on Fig. 4, Fig. 5 and Fig. 6. The screen will show "Auto image " out after the LED light is changed to Green
4. As shown on Fig. 6. The All Reset procedure is finished after "Auto image Adjust" message disappears.
Fig.1
Fig. 4
Fig.7
ViewSonic Corporation
4.

ADJUSTING PROCEDURE

Fig. 2
Fig. 5
4
Fig. 3
Fig. 6
Confidential – Do Not Copy
VE500-1