Remove The C1-Board; Remove The C2-Board; Remove The Plasma Panel Section From The Cabinet Assy (Glass) - Panasonic TC-P50X20P Service Manual

3. Remove the Hanger metals (L, R) fastening screws (×2
each) and remove the Hanger metals (L, R).

8.13. Remove the C1-Board

1. Remove the Hanger metal R and the Stand bracket R.
(See section 8.12.)
2. Remove the flexible cable holder fastening screws (×8
).
3. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
4. Disconnect the flexible cables (C10 and C11).
5. Remove the screws (×4

8.14. Remove the C2-Board

1. Remove the Tuner unit. (See section 8.5.)
2. Remove the Hanger metal L and the Stand bracket L.
(See section 8.12.)
3. Remove the flexible cable holder fastening screws (×8
).
4. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C20 and C21).
6. Disconnect the connectors (C23 and C25).
7. Remove the screws (×4
) and remove the C1-Board.
) and remove the C2-Board.
8.15. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the plasma panel fastening screws (×3
remove the cabinet assy.
2. For leaving the cabinet assy from the plasma panel, pull
the bottom of the cabinet assy forward, lift, and remove.
25
) and