Advertisement
Ordering Information
Product Code:
F942 Luxura™ 5 Whirlpool Bath with
3 Tile Flange Right Hand
F941 Luxura™ 5 Whirlpool Bath with
3 Tile Flange Left Hand
H168 Luxura™ 5 Bath with 3 Tile
Flange Right Hand
F943 Luxura™ 5 Bath with 3 Tile
Flange Left Hand
• Right and Left Hand Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit #X559
Rotary Drain Kit, 26" Cable #8730
HTC Jet Trim Kit: #D095
BMH Jet Trim Kit: #J869
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
8-1/4"
16"
32"
2-1/2"
5-1/4"
Product Shown: Luxura™ 5 Whirlpool Bath with 3 Tile Flange Left Hand Model: F941
* Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.
L
SIDE VIEW
#FR59 12/06
Luxura™ 5 Whirlpool Bath with 3 Tile Flange
Installation Notes
Refer to installation instructions included with fixture before beginning installation.
Please confirm product availability and specifications before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Electrical Components and Electrical Specifications do not apply to non-jetted baths.
60"
12" x 5"*
Motor
2-1/2"
Opt. Service Access
(25 mm)
1"
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
Luxura™ 5 Bath with 3 Tile Flange
Technical Specifications
Dimensions
60" L x 32" W x 20-1/4" H
(1524 mm) L x (813 mm) W x (514 mm) H
Drain/Overflow
A: 15-1/4" (387 mm) B: 8-1/4" (210 mm)
Cutout
Not Applicable
Total Weight
F941, F942: 697 lb (264 kg) / 52 lb/sq. ft. (255 kg/m
F943, H168: 672 lb (305 kg) / 50 lb/sq. ft. (246 kg/m
Operating Gallonage
44 U.S. Gal. (167 Liters)
Max. 50 U.S. Gal. (189 Liters)
Product Weight
F941, F942: 80 lb (36 kg)
F943, H168: 55 lb (25 kg)
Skirt Mounting
Optional, U-Frame
Electrical Specifications
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Optional)
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
W
H
END VIEW
Model: F941, F942
Model: F943, H168
)
2
2
)
Models F941, F942 only
Models F941, F942 only
A
B
DRAIN/OVERFLOW
Advertisement
