OPENTEL ODS 3600CW User Manual page 6

4. C. REMOTE CONTROL UNIT
1) POWER : This is used to switch the receiver to ON/STANDBY mode.
2) MUTE : This key is used to toggle between normal and muted audio.
3) 0-9 NUMERIC KEYS : These keys are used to enter numeric values and to
0 ~ 9
select the channel directly by entering its number.
4) CH ∙CH : These keys are used to change channels and to browse the menu.
▲ ▼
∙VOL
5) VOL ▶ ◀ : These keys are used to vary the volume level and to change the
cursor options in the menu.
6) MENU : This key is used to open up the menu.
MENU
7) EXIT : This key is used to exit from any menus.
EXIT
OK 8) OK : This key is used to enter and confirm any data to the receiver in the menu systems.
The Channel list can be accessed directly by pressing this Key
in the normal view mode.
9) Page Up : This key is used to page up the menu.
10) Page Down : This key is used to page down the menu.
11) FAV : This key is used to switch between favorite lists.
FAV
12) GUIDE : This key is used to open up the Electronic Program Guide.
GUIDE
13) i : This key is used to view the channel information.
i
14) : This key is used to toggle between the TV channel and the radio channel.
8
HARDWARE DESCRIPTION
15) LAST : This key is used to return to the previous channel.
LAST
16) AUDIO : This key is used to select the soundtrack list for the current service
AUDIO
and also used to select audio mode.
17) PAUSE : This key is used to pause the screen.
PAUSE
18) NTSC/PAL : This key is used to convert video mode.
NTSC
/ PAL
19) SAT : This key is used to select the satellite.
SAT
20) F1, F2, F3, F4 : Function Keys.
F1 F2 F3 F4
21) TEXT : This key is for Teletext.
TEXT
HARDWARE DESCRIPTION 9