OPENTEL ODS 3600CW User Manual page 11

On time : Set the time when the receiver will be automatically turned on
Off time : Set the time when the receiver will be automatically turned off.
Additional Timer : Set three event timer.
6.1.3.C. Additional Timer
Timer No.
: Number of timer.
Enable
: Enable or disable the timer.
On time
: Set the time when the receiver will be automatically turned on.
Off time
: Set the time when the receiver will be automatically turned off.
Period
: Set the timer period. (Daily / Weekly / One Time)
Date
: Set the day (Period : Weekly) or date(Period : One Time).
Service
: Set the service type to TV or Radio.
Channel
: Set the channel number of service.
18 MENU OPERATION
You can set three additional timer.
Each timer have there own time, date and channel.
6.1.3.D.Parental Controls
This function prevents children or unauthorized
persons from watching programs.
Also you can change PIN(Personal Identification
Number) code.
Select "Parental Control" menu in the " Receiver
Settings" menu, and the following screen will be
displayed.
Receiver lock Lock or unlock your receiver. When receiver is locked, the PIN code will
be required whenever you turn on the receiver.
Menu lock
Lock or unlock the menu of your receiver. When menu is locked, the PIN
code will be required whenever you enter the menu items.
Maturity Rate
Set the level of maturity rate that the receiver will show the channels
without asking PIN code.
Change PIN code
You can change your PIN code from the previous one in this menu. If
you forget the PIN code, you have to contact the distributor to find out it.
The factory default is "0000".
6.1.3.E. RECEIVER UPGRADE
You can upgrade the software of this receiver through serial port when the new software is
released.
Please contact the distributor for receiver upgrade.
Distributor supports you useful information and new software for the receiver.
6.1.3.F. FACTORY DEFAULT
This is to restore the factory set values in case the user has encountered some problems
after changing any new values of channel data and others which may be in error.
Select "Factory Default" menu in the "Receiver Settings" menu and press "OK" key.
If you want to continue, select "Yes" cell.
The receiver will be reset to settings automatically.
Please note that the "Factory Default" procedure may take a few minutes.
MENU OPERATION 19