Use Your Headset; Connect The Headset To A Bluetooth Device; Manage Your Calls And Music - Philips M2BT User Manual

4 Use your
headset
Connect the headset to a
Bluetooth device
1
Turn on your mobile phone/Bluetooth
device.
2
Press and hold the call/music button to
turn the headset on.
» The blue LED flashes.
» The headset is reconnected to the
last two connected mobile phones/
Bluetooth devices automatically. If one
of them is not available, the headset
tries to reconnect to the second last
connected device.
Tip
•
If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headset, you have to reconnect the headset and mobile
phone/Bluetooth device manually.

Manage your calls and music

Call/Music button
Task Operation
Turn the Press and
headset on. hold for 2
seconds.
Sound or LED
indicator
• 1 short beep
• 3 white flashes:
battery low <
25%
• 2 white flashes:
battery level <
50%
• 1 blue flash:
battery level >
50%
Turn the Press and
headset off. hold for 4
seconds.
Play or Press once.
pause
music.
Pick up/ Press once.
hang up a
call.
Reject an Press and
incoming hold
call.
Redial the Press twice.
last number.
Switch Press twice
caller
during a
call.
Volume/Track control button
Adjust volume.
Skip forward.
Skip backward.
Mute/unmute the
microphone in a call.
Other headset indicator status
Headset status
The headset is connected
to a Bluetooth device,
while the headset in
standby mode or while you
are listening to music.
The headset is ready for
pairing.
The headset is on but not
connected to a Bluetooth
device.
• 1 long beep
• 1 long white
flash
1 short beep
1 short beep
1 short beep
1 short beep
1 long beep
Slide up/ N/A
down
Press once 1 short
beep
Press twice 1 short
beep
Press 2 short
once beeps
Indicator
The blue LED
flashes for every
8 seconds.
The LED flashes
blue and white
alternately.
The blue LED
flashes quickly.
EN
7