Control Panel - Hotpoint Ariston Aqualtis AQGMD 129 Instruction Booklet

Control panel

PROGRAMME
knob and MEMO
buttons
ON-OFF/CANCEL
button with indicator light
ON-OFF/CANCEL button with indicator light
press the button briefly to switch the machine on or
off. The green indicator light shows that the machine
is switched on. To switch the washer-dryer off during
a wash cycle, press and hold the button for
approximately 2 seconds; pressing the button quickly
or accidentally will not switch the machine off.
If the machine is switched off during a wash cycle,
the programme will be cancelled.
PROGRAMME knob: this can be rotated in both
directions. To set a more suitable programme, please
refer to the “Table of Programmes”.
The knob is locked into position during the wash cycle.
MEMO buttons: press and hold one of the buttons to
store a cycle with your own set preferences in the
memory of the machine. To recall a previously-stored
cycle, press the corresponding button.
TEMPERATURE button: press to decrease the
temperature: the value will be shown on the display.
SPIN CYCLE button: press to reduce the r.p.m.
value or to exclude the spin cycle completely: the
value will be shown on the display.
DELAYED START button: press to set a delayed
start time for the selected programme. The delay
time will be shown on the display.
OPTION buttons: the name of the option will be shown
on the display when the corresponding button is
pressed. When the relevant indicator light illuminates,
this shows that the option has been selected.
INFO button: press the button to display information
relating to the selected wash cycle and options.
TEMPERATURE
SPIN SPEED
button
OPTION
INFO
buttons
button
DISPLAY
:
WASH
button CYCLE
PHASE
icons
ECO
indicator
light
DELAY TIMER
indicator light
button
WASH CYCLE PHASE icons: these light up to
provide an indication of the progress of the wash cycle
(Wash - Rinse - Spin
lights up when the cycle has finished.
START/PAUSE button with indicator light: when the
green indicator light flashes slowly, press the button to
start the wash cycle. When the cycle has started, the
indicator light is illuminated in a fixed manner. To pause
the wash cycle, press the button again; the indicator light
will turn orange and begin to flash again. If the “Door
Locked” indicator light is off, the porthole door may
be opened. To restart the wash cycle from the point at
which it was interrupted, press the button again.
DOOR LOCKED indicator light: this indicates
that the porthole door is locked. To open the door,
pause the wash cycle (see following page).
CHILD LOCK button and indicator light: this is used
to enable or disable the “Child lock” function, by
pressing the button for approximately 2 seconds. When
the indicator light is illuminated, the control panel is
locked. This avoids accidental changes being made to
the wash cycles, especially where children are at home.
ECO indicator light: the
electricity saving reaches at least 10% (this can be
achieved by adjusting the wash cycle settings).

When the machine is first switched on, you will be asked to
choose a language (Select Language appears on the display):
press the INFO button repeatedly until the required language
appears on the display. After 5 seconds the language
selection will be stored in the memory of the machine. If the
wrong language is selected by mistake, press and hold the
INFO and DELAYED START buttons simultaneously; this will
return the language selection menu to the display.
START/PAUSE
button with indicator light
CHILD LOCK
button and indicator
light
DOOR
LOCK
- Drying ). The text
icon lights up when the
5
GB