CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
25. Use the SRT-6 as an aid to lift out the ENGINE MODULE from
the D-COVER ASSY.
27. Take the SS-45 and fit it between the CAMERA MODULE and
the shielding.
29. Remove the DC-JACK with a DC-plug.
Service Manual 6233 RM-45 / 6234 RM-23
Page
6
(9)
CONFIDENTIAL
26. Use the soldering jig RJ-108 as a support when working at
the CAMERA MODULE. This prevents from damaging or soiling the
underneath spring contacts.
28. Press the tool and pull out the CAMERA MODULE.
30. Carefully remove the EARPIECE with the dental tool. Always
use a new adhesive tape when replacing the EARPIECE.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved .0
MGR
25.Apr.2006